Blog

This Dad Rigged a Video Game To Be Powered by a Rowing Machine

CAD designer Jeremy Fielding builds things from scavenged materials including vacuums and treadmills and posts about them on his YouTube channel. The idea for this project—a video-game system rigged to draw its power from a rower—came after Fielding noticed his kids playing on their Nintendo Wii for several hours at a time. Here are the components he used.

I removed the impeller and used a generator to replace that resistance, then used a grinder and cut-off wheel to cut a section from the mesh guard so the drive belt could fit through, and then fitted a pulley to the flywheel. Growatt 3000

This Dad Rigged a Video Game To Be Powered by a Rowing Machine

130-volt Permanent Magnet DC Motor

I pulled the motor from a treadmill I got free on Craigslist. As long as it’s a permanent magnet motor, you can spin it and it will work as a generator. If you’re going to buy one, though, a dedicated generator will be more efficient.

EPEVER 20A MPPT Solar Charge Controller

The voltage and current coming from the motor is pretty rough. This charge controller dials the output down to a consistent 14 volts that goes to the inverter.

Two RadioShack SLA Alarm Batteries

Connected in series, these batteries help stabilize the voltage going to the inverter. They also give the Wii power when you switch the person rowing. You could use something bigger like a car battery, but that’s too much power—you could stop rowing for hours and keep playing. These batteries give you only about 45 seconds.

Converts the DC motor’s power into AC. Inverters have a very small operating range. If the power going in is even slightly outside 12 to 14 volts, it shuts off, which is why I have the charge controller and batteries.

I salvaged one from the treadmill, bought one and split it in half, and made others to adjust resistance depending on the strength of the person who is rowing.

Connects the flywheel to the DC motor. I attached the motor to the legs of the rowing machine on wood mounts that I made, and adjusted the position for the right belt tension.

How to Get Started in Making Your Own Ice Cream

How To Make Simple, Easy Pancakes

How To Build a Simple Pencil Box

How To Build Your Own Drone

How to Make a Scale Model of the Universe

Wet or Dry? The Two Ways To Cook Meat

How To Use Science To Make Better Booze

How to Make Your Own Monster Truck

How to Make a Interactive Motorized Chandelier

How to Make Contact With Aliens

How to Make a Concrete Canoe

How to Make Underground Speaking Tubes

A Part of Hearst Digital Media

We may earn commission from links on this page, but we only recommend products we back.

This Dad Rigged a Video Game To Be Powered by a Rowing Machine

Inverter Invt Solar PumpJinko Solar Panel ©2024 Hearst Magazine Media, Inc. All Rights Reserved.